Skip to main content
NetApp Knowledge Base

FC-VI adapter: Hardware initialization failed for port

  1. Last updated
  2. Save as PDF
Views:
1,123
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster
  • Onboard FC-VI ports
  • AFF-A300

Issue

  • Following an FCVI reset the FCVI ports fail to initialize and remain offline:
[ClusterA-01: ispfcvi2500_main1: fcvi.qlgc.system.error:error]: FC-VI adapter: System Error on port 0e. Resetting the port
[ClusterA-01: ispfcvi2500_main2: fcvi.qlgc.system.error:error]: FC-VI adapter: System Error on port 0f. Resetting the port
[ClusterA-01: ispfcvi2500_port2: fcvi.update.link.state:notice]: FC-VI adapter: Physical link is down on port 0f
 
  • Sysconfig -A output shows the physical link as down:
slot 0: FCVI Host Adapter 0e (QLogic 8324(2672) rev. 2, unknown)
        Physical link:       DOWN
        FC Node Name:        50:0a:09:80:00:ff:ff:b0
        Firmware rev:        8.01.141
        Serial No:           (null)
        Host Port Id:        0xffffffff
        FC Packet size:      2048
        Reading SFP information failed
slot 0: FCVI Host Adapter 0f (QLogic 8324(2672) rev. 2, unknown)
        Physical link:       DOWN
        FC Node Name:        50:0a:09:81:00:ff:ff:b0
        Firmware rev:        8.01.141
        Serial No:           (null)
        Host Port Id:        0xffffffff
        FC Packet size:      2048
        Reading SFP information failed
  • Adapter does not recover after a reboot and during boot reports an initialization failure:
[ClusterA-01:fcvi.initFailed:error]: FC-VI adapter: Hardware initialization failed for port 0f
[ClusterA-01:fcvi.initFailed:error]: FC-VI adapter: Hardware initialization failed for port 0e
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.