Skip to main content
NetApp Knowledge Base

LLDP error detects from the switch sides where connect solidfire storage

  1. Last updated
  2. Save as PDF
Views:
339
Visibility:
Public
Votes:
1
Category:
sf-series
Specialty:
solidfire
Last Updated:

Applies to

NetApp SolidFire SF19210 and SF38410

Issue

The following LLDP errors are detected from the switch side:
  • LLDP neighbor port vlan information is missing
  • LLDP neighbor is bridge and its port vlan portVlan, mismatches with the local port vlan portVlan,. If neighbor is running MST(802.1s) protocol, this could result in a layer2 topology with a loop

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.