Skip to main content
NetApp Knowledge Base

Element OS upgrade fails at pre-upgrade health check phase

  1. Last updated
  2. Save as PDF
Views:
64
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

Applies to

  • SolidFire AFA
  • NetApp HCI Storage Nodes
  • 12.7.0.380

Issue

  • Unable to initiate the cluster upgrade through the mNode due to health check failure.
  • Upgrade fails during the pre-upgrade health check phase.
  • EOS upgrade from 12.7 version to 12.9
  • mNode version 12.7

    Error: A Health check was initiated at another source and is currently running on thiscluster. Try the operation again a few minutes.

    doc_211706_image_1.png
mnode json log:

doc_211706_image_2.png
Following is also seen in the mnode logs:

speed","name":"check_upload_speed","nodeID":5,"nodeName":"solidfire-jpc2-002-n037","passed":false,"remedy":"If slow data speeds are reported between a storage node and management node, check network routing and equipment."},{"KB":null,"checkID":null,"data":{},"description":"Measure the upload speed between the storage node and the management node.","displayName":"Measure node to mnode connection speed","name":"check_upload_speed","nodeID":6,"nodeName":"solidfire-jpc2-002-n038","passed":false,"remedy":"If slow data speeds are reported between a storage node and management node, check network routing and equipment."},{"KB":null,"checkID":null,"data":{},"description":"Measure the upload speed between the storage node and the management node.","displayName":"Measure node to mnode connection speed","name":"check_upload_speed","nodeID":7,"nodeName":"solidfire-jpc2-002-n039","passed":false,"remedy":"If slow data speeds are reported between a storage node and management node, check network routing and equipment."},{"KB":null,"checkID":null,"data":{},"description":"Measure the upload speed between the storage node and the management node.","displayName":"Measure node to mnode connection speed","name":"check_upload_speed","nodeID":8,"nodeName":"solidfire-jpc2-002-n040","passed":false,"remedy":"If slow data speeds are reported between a storage node and management node, check network routing and equipment."},{"KB":null,"checkID":null,"data":{},"description":"Report any cluster faults.","displayName":"Check for presence of any blocking cluster

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.