Skip to main content
NetApp Knowledge Base

How do I check the HBA and link speed from a Solaris Host?

Views:
2,444
Visibility:
Public
Votes:
4
Category:
fas-systems
Specialty:
san
Last Updated:

 

Applies to

  • Solaris OS
  • SAN Protocol

Answer

  • Use the sanlun fcp show adapter -v <adapter> command to display information about the HBA:
# sanlun fcp show adapter -v lpfc1
lpfc1 WWPN:10000000fedcba98 
WWNN: 20000000fedcba98 
driver name: lpfc 
model: LP9002 
model description: Emulex LightPulse LP9002 2 Gigabit PCI Fibre Channel Adapter 
serial number: 0000c92bfe6a 
hardware version: 2002606d 
driver version: 5.00e; HBAAPI v1.3, 3-29-02 
firmware version: 3.90A7 (C2D3.90A7) 
Number of ports: 1 
port type: Fabric 
port state: Operational 
supported speed: 2 GBit/sec 
negotiated speed: 2 GBit/sec 
OS device name: /devices/pci@8,700000/fibre-channel@3

 

  • For hosts that do not have the Solaris Host Utilities Kit installed, similar information can be found using the fcinfo hba-port -l command:
BA Port WWN: 10000000fedcba98
OS Device Name: /dev/cfg/c3
Manufacturer: Emulex
Model: LPe12002-S
Firmware Version: 1.00a12 (U3D1.00A12)
FCode/BIOS Version: Boot:5.03a0 Fcode:3.01a1
Serial Number: 4925382+12450000M8
Driver Name: emlxs
Driver Version: 2.90.15.0 (2014.01.22.14.50)
Type: N-port
State: online
Supported Speeds: 2Gb 4Gb 8Gb 
Current Speed: 4Gb 
Node WWN: 20000000fedcba98
Link Error Statistics:
Link Failure Count: 1
Loss of Sync Count: 144
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 7770
Invalid CRC Count: 0

Additional Information

N/A

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.