Skip to main content
NetApp Knowledge Base

Total packet loss when pinging from cluster lif

Last Updated:

Applies to



Not all paths are reachable when attempting to test cluster network using Advanced privilege command:

::*> cluster ping-cluster -node node1
Host is node1
Getting addresses from network interface table...
Local =
Remote =
Ping status:
Basic connectivity succeeds on 2 path(s)
Basic connectivity fails on 2 path(s)
Detected 1500 byte MTU on 2 path(s):
Local to Remote
Local to Remote

Larger than PMTU communication succeeds on 2 path(s)
RPC status:
1 paths up, 0 paths down (tcp check)
1 paths up, 0 paths down (udp check)
The following EMS alert will be displayed:
EMS Alert:
vifmgr.cluscheck.droppedall: Total packet loss when pinging from cluster lif Cluster1_clus1 (node Cluster1) to cluster lif Cluster1_clus2 (node Cluster1).


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.