Skip to main content
NetApp Knowledge Base

"system service-event show" shows "P1V05_PCH_STBY: Voltage Sensor 16 LNC"

  1. Last updated
  2. Save as PDF
Views:
766
Visibility:
Public
Votes:
2
Category:
fas-systems
Specialty:
HW
Last Updated:

Applies to

  • AFF A800
  • Baseboard Management Controller (BMC)

Issue

  • system service-event show shows P1V05_PCH_STBY: Voltage Sensor 16 LNC.
  • BMC IPMI notice in the system event log (SEL) reports the P1V05_PCH_STBY sensor as Lower Non-critical going low.
Example:
Record 1885: Fri Sep 03 07:54:32.800000 2021 [IPMI.notice]: 0415 | 02 | EVT: 01509191 | P1V05_PCH_STBY | Assertion Event, "Lower Non-critical going low " | Reading: 0.986 | Threshold: 0.986
  • P1V05_PCH_STBY status is ok in IPMI sensors output.
Example:
Sensor Name      | Current    | Unit       | Status     | LCR       | LNC       | UNC       | UCR-----------------+------------+------------+------------+-----------+-----------+-----------+-----------
PVCCIN_CPU0      | 1.733      | Volts      | ok         | 0.011     | 0.021     | 2.457     | 2.468
PVCCIN_CPU1      | 1.733      | Volts      | ok         | 0.011     | 0.021     | 2.457     | 2.468
PVCCIO_CPU0      | 0.966      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVCCIO_CPU1      | 0.972      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVDDQ_ABC        | 1.156      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVDDQ_DEF        | 1.156      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVDDQ_GHJ        | 1.156      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVDDQ_KLM        | 1.156      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVTT_ABC         | 0.564      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVTT_DEF         | 0.564      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVTT_GHJ         | 0.564      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
PVTT_KLM         | 0.564      | Volts      | ok         | 0.014     | 0.020     | 1.707     | 1.734
P3V3_BMC         | 3.218      | Volts      | ok         | 2.958     | 3.045     | 3.564     | 3.668
P1V8_PCH_STBY    | 1.700      | Volts      | ok         | 0.938     | 0.993     | 2.312     | 2.380
PVNN_PCH_STBY    | 0.945      | Volts      | ok         | 0.891     | 0.925     | 1.156     | 1.190
P1V05_PCH_STBY   | 0.993      | Volts      | ok         | 0.938     | 0.986     | 1.102     | 1.149
  • Controller Fault LED is on.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.