Skip to main content
NetApp Knowledge Base

Storage show fault reports "ENCLOSURE BYPASSED" due to faulty disk

Views:
197
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:
10/4/2024, 1:42:52 AM

Applies to

ONTAP 9

Issue

  • ENCLOSURE BYPASSED can be found in storage show fault.

> storage show fault -v
Enclosure Status: non-critical
Channel: 10a
Shelf: 3
Shelf Type: DS224-12             
Module Type: IOM6

Disk Elements:
Element Status                  Status Bytes  Status Descriptions
...
 19 [Bay 19]: OK                01,13,00,00  
 20 [Bay 20]: NONCRITICAL       03,14,10,04   ENCLOSURE BYPASSED B, BYPASSED B
 21 [Bay 21]: OK                01,15,00,00  
...   

  • sysconfig -a shows the effected disk is normal.

 slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
  Firmware rev:       01.11.00.00
  Base WWN:           5:00a098:0014dc6:88
  Phy State:          [0] Enabled, 6.0 Gb/s
                      [1] Enabled, 6.0 Gb/s
                      [2] Enabled, 6.0 Gb/s
                      [3] Enabled, 6.0 Gb/s
  QSFP Vendor:        Molex Inc.     
  QSFP Part Number:   112-00176+A0   
  QSFP Type:          Passive Copper 0.5m ID:00
                ...
                01.19: NETAPP   X308_SMNRY03TSSA NA00 2538.5GB 512B/sect 
                01.20: NETAPP   X308_THARR03TSSM NA00 2538.5GB 512B/sect 
                01.21: NETAPP   X308_THARR03TSSM NA00 2538.5GB 512B/sect 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.