Skip to main content
NetApp Knowledge Base

Ports e0a, e0b, e0M, e0P on FAS25xx are down

Views:
3,929
Visibility:
Public
Votes:
2
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS2520
  • FAS2552
  • FAS2554

Issue

  • Cannot access the node management port.
  • Port Link Status LED off.
  • It is not possible to confirm this issue from ASUP since the ASUP can't be collected due to e0M is down.
  • Port e0a, e0b, e0M, e0P are down status in the following commands' output.

Example of "sysconfig -a": 

Node: NetApp-2
    NetApp Release 8.3P2: Tue May 19 01:39:13 PDT 2015
    System ID: XXXXXXXXX (NetApp-2); partner ID: XXXXXXXXX (NetApp-1)
    System Serial Number: XXXXXXXXXXXX (NetApp-2)
    slot 0: Quad Gigabit Ethernet Controller 82580
        e0a MAC Address:    00:xx:xx:xx:xx:48 (auto-1000t-fd-down)
        e0b MAC Address:    00:xx:xx:xx:xx:49 (auto-1000t-fd-down)
        e0M MAC Address:    00:xx:xx:xx:xx:4a (auto-1000t-fd-down)
        e0P MAC Address:    00:xx:xx:xx:xx:4b (auto-1000t-fd-down)

Example of "event log show":

7/17/2020 01:19:39  NetApp-2     INFORMATIONAL snmp.link.down: Interface 2 is down.
7/17/2020 01:19:39  NetApp-2     INFORMATIONAL netif.linkDown: Ethernet e0a: Link down, check cable.
7/17/2020 01:19:39  NetApp-2     INFORMATIONAL snmp.link.down: Interface 1 is down.
7/17/2020 01:19:38  NetApp-2     INFORMATIONAL netif.linkDown: Ethernet e0M: Link down, check cable.
7/17/2020 01:19:38  NetApp-2     INFORMATIONAL snmp.link.down: Interface 7 is down.
7/17/2020 01:19:38  NetApp-2     INFORMATIONAL netif.linkDown: Ethernet e0P: Link down, check cable.
7/17/2020 01:19:38  NetApp-2     INFORMATIONAL snmp.link.down: Interface 8 is down.
7/17/2020 01:14:09  NetApp-2     NOTICE rdb.ha.verified: Verified that cluster high availability (HA) is configured correctly, and that on-disk mailboxes are intact.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.