Skip to main content
NetApp Knowledge Base

NSM module info not visible from partner node

Views:
13
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

  • AFF-A250
  • AFF-A20
  • Internal NVMe disk shelf
  • ONTAP 9

Issue

  • The two internal NSM8E/NSM16E modules associated with the Shelf 0 internal shelf. Neither are reporting the partner FW or module state.
  • Internal NVMe module firmware/serial visibility and communication error.
  • No information about shelf 0 module B is visible in the sysconfig -a on node A. Similarly, no information about shelf 0 module A is visible in the sysconfig -a on node B.

Node A sysconfig -a:
  Shelf 0: NS224NSM16E  Firmware rev. NSM16E A: 0140  NSM16E B:     <<<<missing module B info

Node B sysconfig -a:
  Shelf 0: NS224NSM16E  Firmware rev. NSM16E A:   NSM16E B: 0140   <<<<missing module A info

  • EMS report pcie.stealth.errors on one node.

Wed Mar 25 10:56:51 +0800 [node02: SPR error: pcie.stealth.errors:debug]: params: {'pcie_errors': 'EBG: RPT(0,14,0): SecStatus(RcvMstAbt); '}

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.