Skip to main content
NetApp Knowledge Base

Getting system configuration error during the ONTAP upgrade

  1. Last updated
  2. Save as PDF
Views:
9
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

  • ONTAP 9
  • FAS
  • AFF

Issue

  • Below alert is triggered just before the node was going down for an ONTAP upgrade.

    EMS

[Node1: rc: cmds.sysconf.logErr:notice]: sysconfig: HBA,4-Port FCP Target 32Gb PCIe card (PN X1135A) in slot 2 must be in one of these slots: 1,4,5. .
[Node1: rc: callhome.sys.config.crit:error]: Call home for SYSTEM CONFIGURATION ERROR

  • From sysconfig -ac, we see the below

Node 1

sysconfig: slot 1 OK: X1149A: 2p 10G Base-T Ethernet HBA
sysconfig: HBA,4-Port FCP Target 32Gb PCIe card (PN X1135A) in slot 2 must be in one of these slots: 1,4,5.
sysconfig: slot 3 OK: X1151A: 2p 100G Naples-100 Smart IO
sysconfig: slot 4 OK: X2072A: 4x12G miniSAS Controller HBA
sysconfig: slot 5 OK: X1149A: 2p 10G Base-T Ethernet HBA

Node 2

sysconfig: slot 1 OK: X1149A: 2p 10G Base-T Ethernet HBA
sysconfig: HBA,4-Port FCP Target 32Gb PCIe card (PN X1135A) in slot 2 must be in one of these slots: 1,4,5.
sysconfig: slot 3 OK: X1151A: 2p 100G Naples-100 Smart IO
sysconfig: slot 4 OK: X2072A: 4x12G miniSAS Controller HBA
sysconfig: slot 5 OK: X1149A: 2p 10G Base-T Ethernet HBA

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.