Skip to main content
NetApp Knowledge Base

EMS reports "ses.status.temperatureWarning:alert"

  1. Last updated
  2. Save as PDF
Views:
768
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
HW
Last Updated:

Applies to

DS2246
DS212

Issue

  • EMS reports "ses.status.temperatureWarning:alert"

Example:

[node01: dsa_worker3: ses.status.temperatureWarning:alert]: DS2246 (S/N SHFFGXXXXXXXXXX) shelf 10 on channel 0a temperature warning for Temperature sensor 7: not installed or failed. Current temperature: 27 C (80 F). This module is on the rear of the shelf at the top left, on shelf module A.
or
[ses.status.temperatureWarning:alert]: DS212-12 (S/N ***) shelf 13 on channel 3d temperature warning for Temperature sensor 2: not installed or failed. Current temperature: 28 C (82 F). This module is on the inside of the shelf on the midplane.
[ses.status.ModuleWarn:alert]: DS212-12 (S/N ***) shelf 13 on channel 3d SAS expander warning for SAS shelf electronics 1: communication error. This module is on the rear of the shelf at the top left, on shelf module A.
[ses.status.ACPWarn:error]: DS212-12 (S/N*** ) shelf 13 on channel 3d ACP Processor warning for SAS shelf ACP processor 1: communication error. ; Alternate Control Path hardware failed This module is on the rear of the shelf at the top left, on shelf module A.

  • Examining environment in ASUP:

 Temperature Sensor installed element list: 1, 2, 3, 4, 5, 6, 7, 8; with error: none
 Shelf temperatures by element:
   [1] 22 C (71 F) (ambient)  Normal temperature range
   [2] 25 C (77 F)  Normal temperature range
   [3] 26 C (78 F)  Normal temperature range
   [4] 49 C (120 F)  Normal temperature range
   [5] 26 C (78 F)  Normal temperature range
   [6] 49 C (120 F)  Normal temperature range
   [7] Unavailable                     >>>>>>>>>> IOM A
   [8] 28 C (82 F)  Normal temperature range

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.