Skip to main content
NetApp Knowledge Base

CRC Errors Observed after switchless change to switch cluster

Views:
4
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • Switchless cluster change to switch cluster
  • CRC errors reporting on multiple ports

Issue

CRC errors are being observed on the cluster network switch after changing from a switchless configuration to a switched configuration.

--interface e0a(0hours,10minutes,7seconds)--
RECEIVE
Total frames: 1265k | Frames/second: 2086 | Total bytes: 1330m
Bytes/second: 2191k | Total errors: 10 | Errors/minute: 1
Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 184
Non-primary u/c: 0 | CRC errors: 10 | Runt frames: 0
Fragment: 0 | Long frames: 0 | Jabber: 0
Length errors: 0 | No buffer: 0 | Xon: 0

--interface e0b(0hours,10minutes,5seconds)--
RECEIVE
Total frames: 498k | Frames/second: 824 | Total bytes: 1242m
Bytes/second: 2054k | Total errors: 15 | Errors/minute: 1
Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 183
Non-primary u/c: 0 | CRC errors: 15 | Runt frames: 0
Fragment: 0 | Long frames: 0 | Jabber: 0
Length errors: 0 | No buffer: 0 | Xon: 0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.