Skip to main content
NetApp Knowledge Base

CPU0 Temp sensors show failed

  1. Last updated
  2. Save as PDF
Views:
707
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

FAS8200

Issue

  • Error is reported from event log show command:

::> event log show
Time                Node             Severity      Event
------------------- ---------------- ------------- ---------------------------
2/12/2025 15:31:01  node_name         ERROR         monitor.temp.unreadable: The controller temperature (CPU0 Temp Margin) is not readable.

  • CPU0 Temp sensors show failed in SP-LATEST-IPMI.

CPU0 Temp Avg            failed            -- C        --          --         -11 C        -1 C     
InFlow Temp Avg          normal            23 C         0 C         5 C        50 C        55 C     
OutFlow Temp Avg         normal            37 C         0 C         5 C        65 C        75 C     
PCI Temp Avg             normal            32 C         0 C         5 C        60 C        70 C     
Bat Temp Avg             normal            30 C         0 C         5 C        60 C        70 C     
Amb2 Temp Avg            normal            22 C         0 C         5 C        47 C        52 C     
Amb1 Temp  Avg           normal            22 C         0 C         5 C        47 C        52 C     
PSU2 FRU Fan                                OK
PSU2 FRU Power                              ON
PSU1 FRU Fan                                OK
PSU1 FRU Power                              ON
Fan3 INFO                               FRU_AVAIL
Fan2 INFO                               FRU_AVAIL
Fan1 INFO                               FRU_AVAIL
PSU1 INFO                               FRU_AVAIL
PSU1 INFO                               FRU_AVAIL
Fan1                                      GOOD
Fan2                                      GOOD
Fan3                                      GOOD
PSU1                                      GOOD
PSU2                                      GOOD
CPU0 Temp Margin         failed            -- C        --          --         -11 C        -1 C     
In Flow Temp             normal            23 C         0 C         5 C        50 C        55 C     
Out Flow Temp            normal            37 C         0 C         5 C        65 C        75 C     
PCI Slot Temp            normal            32 C         0 C         5 C        60 C        70 C     
Smart Bat Temp           normal            30 C         0 C         5 C        60 C        70 C     
CPU0 Error                              NORMAL

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.