Skip to main content
NetApp Knowledge Base

CDP information missing for a ethernet port post ONTAP upgrade

Views:
95
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9.10.1x
  • AFF-A800

Issue

  • CDP entry missing port in "device-discovery show"

Cluster::> set d
Cluster::*> device-discovery show -node Node2
(network device-discovery show)
Node/       Local  Discovered
Protocol    Port   Device (LLDP: ChassisID)      Interface         Platform
---------- ------ ------------------------------ ----------------  ----------------
Node2/cdp
            e1a    switch1(FOxxxxxx1D4)          Ethernet1/14      N3K-C3132Q-V
            e1b    Node1234                      e1b               AFF-A800
            e3a    switch1(FDxxxxxxQ18)          Ethernet1/15      N9K-C93180LC-EX
            e3b    switch2(FDxxxxxxPY9)          Ethernet1/15      N9K-C93180LC-EX
            e5a    switch1(FDxxxxxxQ18)          Ethernet1/16      N9K-C93180LC-EX
            e5b    switch2(FDxxxxxxPY9)          Ethernet1/16      N9K-C93180LC-EX
Node2/lldp   
            e0b    Node1234 (d0:xx:xx:xx:xx:f1)  e0b               -
            e1b    Node1234 (d0:xx:xx:xx:xx:f1)  e1b               -
            e3a    switch1(d4:xx:xx:xx:xx:47)    Eth1/15           -
            e3b    switch2(d4:yy:yy:yy:yy:f7)    Eth1/15           -
            e5a    switch1(d4:xx:xx:xx:xx:48)    Eth1/16           -
            e5b    switch2(d4:yy:yy:yy:yy:f8)    Eth1/16           -
12 entries were displayed.

  • However the port is seen online in "net port show".

Cluster::*> net port show -node Node2
(network port show)

Node:Node2
Ignore
Speed(Mbps) Health Health
Port   IPspace    Broadcast Domain Link MTU  Admin/Oper Status Status
------ ---------- ---------------- ---- ---- ----------- -------- ------
e0M    Default    mgmt             up   1500 auto/1000   healthy false
e0a    Cluster    Cluster          up   9000 auto/100000 healthy false
e0b    Cluster    Cluster          up   9000 auto/100000 healthy false
e1a    Cluster    Cluster          up   9000 auto/100000 healthy false
e1b    Cluster    Cluster          up   9000 auto/100000 healthy false
e3a    Default    Default          up   1500 auto/100000 healthy false
e3b    Default    Default          up   1500 auto/100000 healthy false
e5a    Default    Default          up   1500 auto/10000  healthy false
e5b    Default    Default          up   1500 auto/10000  healthy false

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.