BIOS POST Failure - SP IPMI failure Abort AUTOBOOT
Applies to
- FAS2750
- BMC FW 11.6
Issue
Node down and cannot boot, and BMC/SP firmware cannot be updated: BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT
- Controller re-seat does not solve issue
- BMC/SP boots, via console cable:
- System unsuccessfully tries to update to FW 11.10, then restarts
- Accesing BMC/SP via IP console:
- System displays 11.6 and 11.2 as backup images via "Version"
- Backup image is visible as loaded
- Failure message visible from
Loader
:
Boot Loader version 6.0.17
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2023 NetApp, Inc. All Rights Reserved.
BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT
LOADER-A>
- Continuous
Syslog messages
:
Dec 1 04:08:46 BMC env_mgr[2526]: isvc_send_request: 454: ISVCLIB command(4) rsp timed out
Dec 1 04:08:46 BMC env_mgr[2526]: SES page request returned error (2)
Dec 1 04:08:46 BMC env_mgr[2526]: Error opening ses, err -1
Dec 1 04:08:46 BMC env_mgr[2526]: cdev_reopen: error opening device 'ses', err -1.
Dec 1 04:08:46 BMC env_mgr[2526]: cdevices_poll_pending: cdev(2001) re-open, state is 4.
Dec 1 04:09:50 BMC env_mgr[2526]: isvc_send_request: 387: ISVCLIB received msg seq_id 1751 (expected 1807)
- Repeated
events
:
Record 1455: Fri Dec 01 04:09:18.730000 2023 [ASUP.notice]: First notification email | (INVALID CHASSIS CONFIGURATION (Incompatible Partner PCM)) CRITICAL | Send failed
- Output of
storage failover hwassist show
:
Warning: Unable to list entries on node <nodename>. RPC: Couldn't make
connection [from mgwd on node "<nodename>" (VSID: -1) to mgwd at
<ip-address>]
Partner: <nodename>
Hwassist Enabled: -
Hwassist IP: -
Hwassist Port: -
Monitor Status: filer in takeover mode
Inactive Reason: -
Corrective Action: -
Keep-Alive Status: -