Skip to main content
NetApp Knowledge Base

A part of sensors information is invalid

Views:
93
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS9500

Issue

After BMC upgrade, some sensors show invalid in /usr/local/bin/environ -show_all area of SP-LATEST-IPMI log.
 
/usr/local/bin/environ -show_all
================================
Sensor Name              State          Current    Critical     Warning     Warning    Critical
Reading       Low         Low         High       High
-------------------------------------------------------------------------------------------------
PSU3 need replacement    invalid            --
PSU1 need replacement    invalid            --
PSU3                     invalid            --
PSU1                     invalid            --
 
But these sensors show normal status in the other area(For example: /usr/local/bin/ipmi sensors) of SP-LATEST-IPMI log.

/usr/local/bin/ipmi sensors
===============================
Sensor Name      | Current    | Unit       | Status     | LCR       | LNC       | UNC       | UCR
-----------------+------------+------------+------------+-----------+-----------+-----------+-----------
PSU1:

PSU1_Status      | 0x0        | discrete   | AC OK      | na        | na        | na        | na        
PSU1_12V_OP_I    | 37.000     | Amps       | ok         | 0.000     | 0.000     | 140.000   | 144.000   
PSU1_12V_OP_V    | 12.060     | Volts      | ok         | 10.980    | 11.400    | 12.900    | 13.500    
PSU1_AC_IP_I     | 2.170      | Amps       | ok         | na        | na        | 14.000    | 14.980    
PSU1_AC_IP_V     | 230.000    | Volts      | ok         | 88.000    | 90.000    | 255.000   | 255.000   
PSU1_Fault       | 0x0        | discrete   | Deasserted | na        | na        | na        | na        

PSU3:

PSU3_Status      | 0x0        | discrete   | AC OK      | na        | na        | na        | na        
PSU3_12V_OP_I    | 37.000     | Amps       | ok         | 0.000     | 0.000     | 140.000   | 144.000   
PSU3_12V_OP_V    | 12.060     | Volts      | ok         | 10.980    | 11.400    | 12.900    | 13.500    
PSU3_AC_IP_I     | 2.100      | Amps       | ok         | na        | na        | 14.000    | 14.980    
PSU3_AC_IP_V     | 230.000    | Volts      | ok         | 88.000    | 90.000    | 255.000   | 255.000   
PSU3_Fault       | 0x0        | discrete   | Deasserted | na        | na        | na        | na  

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.