Skip to main content
NetApp Knowledge Base

AFF A900 HA interconnect Port ic6a link flapping

  1. Last updated
  2. Save as PDF
Views:
28
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • AFF A900
  • FAS 9500

Issue

Both nodes are reporting the interconnect is flapping:
 
[cluster1-1: gop_eq_thread: ic.linkStatusChange:info]: HA interconnect: Port ic6a link is down.
[cluster1-1: ctrl_hb_port_ic6a: ctrl.rdma.heartBeat:info]: HA interconnect: Missed heartbeat to 192.0.1.5.
[cluster1-1: cf_main: cf.fsm.takeoverOfPartnerDisabled:error]: Failover monitor: takeover of cluster1-2 disabled (HA interconnect error. Verify that the partner node is running and that the HA interconnect cabling is correct, if applicable. For further assistance, contact technical support).
[cluster1-1: cf_main: cf.fsm.takeoverByPartnerDisabled:error]: Failover monitor: takeover of cluster1-1 by cluster1-2 disabled (HA interconnect error. Verify that the partner node is running and that the HA interconnect cabling is correct, if applicable. For further assistance, contact technical support).
[cluster1-1: gop_eq_thread: ic.linkStatusChange:info]: HA interconnect: Port ic6a link is up.

[cluster1-2: gop_eq_thread: ic.linkStatusChange:info]: HA interconnect: Port ic6a link is down.
[cluster1-2: ctrl_hb_port_ic6a: ctrl.rdma.heartBeat:info]: HA interconnect: Missed heartbeat to 192.0.1.4.
[cluster1-2: cf_main: cf.fsm.takeoverByPartnerDisabled:error]: Failover monitor: takeover of cluster1-2 by cluster1-1 disabled (HA interconnect error. Verify that the partner node is running and that the HA interconnect cabling is correct, if applicable. For further assistance, contact technical support).
[cluster1-2: cf_main: cf.fsm.takeoverOfPartnerDisabled:error]: Failover monitor: takeover of cluster1-1 disabled (HA interconnect error. Verify that the partner node is running and that the HA interconnect cabling is correct, if applicable. For further assistance, contact technical support).
[cluster1-2: gop_eq_thread: ic.linkStatusChange:info]: HA interconnect: Port ic6a link is up.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.