Skip to main content
NetApp Knowledge Base

AFF-A400 front FAN attention LED on without any error

  1. Last updated
  2. Save as PDF
Views:
4
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

  • AFF-A400
  • FAS8300

Issue

  • Node front FAN module A3 attention LED on without any error.
  • run local environment status show all FAN module as normal.

Fan1_1 normal 7900 RPM 600 RPM 900 RPM -- --
Fan1_2 normal 7900 RPM 600 RPM 900 RPM -- --
Fan2_1 normal 7900 RPM 600 RPM 900 RPM -- --
Fan2_2 normal 7900 RPM 600 RPM 900 RPM -- --
Fan3_1 normal 8000 RPM 600 RPM 900 RPM -- --
Fan3_2 normal 8000 RPM 600 RPM 900 RPM -- --
Fan4_1 normal 7900 RPM 600 RPM 900 RPM -- --
Fan4_2 normal 7900 RPM 600 RPM 900 RPM -- --

  • FAN module A3 reseat doesn't resolved the issue.
  • Swap FAN module with B3 then attention led of B3 turn on.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.