Skip to main content
NetApp Knowledge Base

AFF-A400's FAN information shows incorrect in "system chassis fru show" command

  1. Last updated
  2. Save as PDF
Views:
14
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

AFF-A400

Issue

In NodeB, Fan1～3 show GOOD, Fan4 does not show, but Fan1～4 also show NOT_PRESENT.
 
Cluster::> system chassis fru show
 
Chassis ID          FRU        Type     State       Nodes Sharing the FRU
------------------- ---------- -------- ----------- -----------------------
XXXXXXXXXXXX        Fan3       fan      GOOD        NodeB
XXXXXXXXXXXX        Fan2       fan      GOOD        NodeB
XXXXXXXXXXXX        Fan1       fan      GOOD        NodeB
XXXXXXXXXXXX        Fan4       fan      GOOD        NodeA
XXXXXXXXXXXX        Fan3       fan      GOOD        NodeA
XXXXXXXXXXXX        Fan2       fan      GOOD        NodeA
XXXXXXXXXXXX        Fan1       fan      GOOD        NodeA
XXXXXXXXXXXX        Fan1       fan      NOT_PRESENT NodeB
XXXXXXXXXXXX        Fan2       fan      NOT_PRESENT NodeB
XXXXXXXXXXXX        Fan3       fan      NOT_PRESENT NodeB
XXXXXXXXXXXX        Fan4       fan      NOT_PRESENT NodeB
 
All of fans' sensor show normal in BMC log.
This issue can not be resolved by reboot BMC or servprocd process.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.