Skip to main content
NetApp Knowledge Base

AFF-A250 chassis temperature sensor information

  1. Last updated
  2. Save as PDF
Views:
707
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

AFF A250

Issue

There is no AFF A250 main chassis and PSU's temperature sensor information in the "AutoSupport ENVIRONMENT log" and "Environmental Status" commands.
 
ENVIRONMENT:
    Channel: 0s
    Shelf: 0
    SES device path: local access: 0s.0
    Module type: NSM8E; monitoring is active  
    Shelf status: normal condition
    SES Configuration, shelf 0:
     logical identifier=********
     vendor identification=NETAPP  
     product identification=NS224NSM8E
     product revision level=0101
    Vendor-specific information:
     Product Serial Number: *******
    Status reads attempted: 2416558; failed: 0
    Control writes attempted: 0; failed: 0
    Shelf bays with disk devices installed:
      13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
      with error: none
    ES Electronics installed element list: 1, 2; with error: none
    ES Electronics reporting element: 1
    ES Electronics information by element:
      [1] Serial number: ****** Part number: 111-04585+A6
          CPLD version: 00  Swaps: 0
      [2] Serial number: ******  Part number: 111-04585+A6
          CPLD version: 00  Swaps: 0
    Enclosure element list: 1; with error: none;
    Enclosure information:
      [1] WWN: ******* Shelf ID: 00
          Serial number: ******* Part number: 111-04890+A0
          Midplane serial number: ****** Midplane part number: 110-00663+B0
    PSM Switch Module installed element list: 1, 2; with error: none
    PSM Switch master module: 2
 
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.