Skip to main content
NetApp Knowledge Base

CONTAP-434999: ONTAP reports module not supported in Slot 4 of AFF C60 MetroCluster systems

  1. Last updated
  2. Save as PDF
Views:
81
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Issue

  • The X60132A 4-port 10/25GbE I/O module installed in slot 4 for cluster and HA on an AFF C60 MetroCluster system might be reported as "unsupported" in an event message, as shown below:

Apr 08 02:37:48 [cluster-01:cmds.sysconf.logErr:notice]: sysconfig: 4p, 10G/25G Ethernet Controller CX7 card (PN X60132A) in slot 4 must be in one of these slots: 1,2,3.
  • The same error is displayed in "run local sysconfig -ac" and "system controller config show-errors" CLI commands:

::*> run local sysconfig -ac
sysconfig: slot 1 OK: X60132A: 4p, 10G/25G Ethernet Controller CX7
sysconfig: slot 2 OK: X60134A: 2p, 100G Ethernet Controller E810
sysconfig: slot 3 OK: X60130A: 2p, 40G/100G Ethernet Controller CX6-DX
sysconfig: 4p, 10G/25G Ethernet Controller CX7 card (PN X60132A) in slot 4 must be in one of these slots: 1,2,3.
sysconfig: No shelf configuration errors detected.
::*> system controller config show-errors
Configuration Info and Errors for Node: cluster-01
------------------------------------------------------------------------------
sysconfig: 4p, 10G/25G Ethernet Controller CX7 card (PN X60132A) in slot 4 must be in one of these slots: 1,2,3.

 
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.