Skip to main content
NetApp Knowledge Base

CONTAP-234304: Public Report for CONTAP-234304

  1. Last updated
  2. Save as PDF
Views:
8
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Issue

After a switch OS firmware update is completed on the cluster network switches, the system switch ethernet show (ONTAP 9.8 and later) or system cluster-switch show (pre ONTAP 9.8) still reports the previously installed version.
Example:
cluster::> system cluster-switch show
Switch Type Address Model
--------------------------- ------------------ ---------------- ---------------
clus-switch1(F0C12345678) cluster-network 192.168.10.2 NX3132V
Serial Number: F0C12345678
Is Monitored: true
Reason: None
Software Version: Cisco NX-OS(tm) nxos.7.0.3.I4.1.bin, Software (nxos), Version 7.0(3)I4(1), ...
Version Source: SNMP
clus-switch2(F0C87654321) cluster-network 192.168.10.3 NX3132V
Serial Number: F0C87654321
Is Monitored: true
Reason: None
Software Version: Cisco NX-OS(tm) nxos.7.0.3.I4.1.bin, Software (nxos), Version 9.12(3), ...
Version Source: SNMP

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.