Skip to main content
NetApp Knowledge Base

CHW-1355: ADR timeout event reported after L2 watchdog reset

  1. Last updated
  2. Save as PDF
Views:
468
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Issue

An AFF A300 or FAS8200 system reports an ADR timeout event after a L2 watchdog reset of the controller:

  • Seen on system serial console:

Mon Dec 27 16:21:57 2021 [nv2flash.ADR.timeout:ERROR]:ADR(Asynchronous DRAM self-refresh) failed at Mon Dec 27 16:19:48 2021
Mon Dec 27 16:21:57 2021 [nv2flash.restage.progress:NOTICE]: ReStage is not needed because the flash has no data.
  • Seen on system event log of SP:

Record 392: Mon Dec 27 16:21:57 2021 [IPMI.critical]: ADR event ID: 0 at time: 1614397319
Record 393: Mon Dec 27 16:21:57 2021 [IPMI.critical]: ADR Battery destage cycles: 19
{}Record 394: Mon Dec 27 16:22:01 2021 [IPMI Event.critical]: NMI{}{}Record 395: Mon Dec 27 16:22:03 2021 [IPMI Event.critical]: L2 watchdog timeout hard reset{}

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.