Skip to main content
NetApp Knowledge Base

CFDIAGS-40: HW diagnostics fails to initialize X60132A card with FW version 28.49.1014

  1. Last updated
  2. Save as PDF
Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Issue

  • Applicable storage systems: AFF A50, AFF A30, AFF A20, AFF C60, AFF C30, ASA A50, ASA A30, ASA A20, ASA C30, FAS50
  • When using System-Level HW diagnostics (boot_diags) on certain storage systems with the 4-port CX7 25GbE I/O module (X60132A) with FW version 28.49.1014, several error messages stating "FwInit has failed!" are displayed
  • System Test and FW version display for the X60132A card fails.
  • The following is an excerpt of the error messages seen on the console port:

Verifying MST device accessibility...
MST verification attempt 1 of 3
Starting MST service...
Device /dev/mst/mt4129_pciconf1.1 is not readable: E Cannot open Device: /dev/mst/mt4129_pciconf1.1. FwInit has failed!
Device /dev/mst/mt4129_pciconf1 is not readable: E Cannot open Device: /dev/mst/mt4129_pciconf1. FwInit has failed!
...

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.