Skip to main content
NetApp Knowledge Base

Report LUNs Command Not Received by Host

Views:
143
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
san
Last Updated:
11/24/2023, 9:33:33 PM

Applies to

  • ONTAP 9.X
  • Cisco UCS 4.2(2)
  • Cisco UCS 4.2(1)
  • Cisco Switches 8.1(2)

Issue

Host does not receive a report luns response from storage. 
 
  • Report LUN's sent from host.
2023-03-02T20:11:04.049Z cpu65:2098272)nfnic: <2>: INFO: fnic_send_reportLuns: 646: send_reportlun_counter:1 target fcid: 0x000000
 
  • Report LUN Retry on host.
2023-03-02T20:11:29.054Z cpu91:2120926)nfnic: <2>: INFO: fnic_world_report_lun_retry: 1517: report lun retry
 
  • Retry with a successfull response.
2023-03-02T20:11:29.054Z cpu61:2098274)nfnic: <2>: INFO: fnic_handle_report_lun: 1363: Report luns response for target_fcid : 0x000000 target_id:10 num_luns 3

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.