Skip to main content
NetApp Knowledge Base

High application latency due to zero port B2B credit on Cisco Fabric Interconnect

Last Updated:

Applies to

  • Flexpod
  • ONTAP 9
  • SAN switches
  • CISCO UCS with Fabric Interconnect


Latency induced for all the NetApp volumes/LUNs which was mainly driven by the Network layer.

Workload            ID    Latency  Network    Cluster  Data    Disk     QoSMax QoSMin NVRAM   Cloud FlexCache SM Sync VA
--------------- ------ ----------  --------   -------- ------- -------- ------- ----- ------- ----- --------- ------- ----
-total-              -     8.80ms  8.01ms    16.00us 661.00us 102.00us 0ms     0ms   12.00us 0ms   0ms       0ms     0ms
SESKSVM15_FCH..  15981    47.93ms  47.00ms   0ms     846.00us 49.00us  0ms     0ms   33.00us 0ms   0ms       0ms     0ms
-total-              -     8.80ms  8.05ms    14.00us 627.00us 100.00us 0ms     0ms   11.00us 0ms   0ms       0ms     0ms
SESKSVM15_FCH..  15981    81.71ms  80.74ms   0ms     929.00us 17.00us  0ms     0ms   28.00us 0ms   0ms       0ms     0ms
-total-              -    10.05ms  9.00ms    18.00us 892.00us 123.00us 0ms


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.