Cluster switches not getting added to monitoring
Applies to
- Cluster Switch
- Management switch
Issue
- Cluster switch is showing as IP is not reachable.
(system switch ethernet show)
Switch Type Address Model
--------------------------- ------------------ ---------------- ---------------
cluster-sw1(FOC2151XXXX) cluster-network 10.28.XXX.XX NX3132V
Serial Number: Unknown
Is Monitored: false
Reason: IP address not reachable
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
9.3(4)
Version Source: CDP
cluster-sw2(FOC2204XXXX) cluster-network 10.28.XXX.XX NX3132V
Serial Number: Unknown
Is Monitored: false
Reason: IP address not reachable
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
9.3(4)
Version Source: CDP
2 entries were displayed.
- Mgmt LIFs and the cluster switches are in the same subnet.
Cluster::*> net int show -role *m*
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
cluster
cluster_mgmt up/up 10.28.XXX.XX/24 cluster-01 e0M true
cluster-01_mgmt1 up/up 10.28.XXX.XX/24 cluster-01 e0M true
cluster-02_mgmt1 up/up 10.28.XXX.XX/24 cluster-02 e0M true
3 entries were displayed.
- Pinging the switch from cluster mgmt fails.
Pinging the switch from cluster mgmt fails
cluster::*> net ping -vserver cluster -lif cluster_mgmt -destination 10.28.XXX.XX
(network ping)
no answer from 10.28.XXX.XX
- ARP entries on both node's e0M is not having switch IPs (10.28.XXX.XX and 10.28.XXX.XX) and MACs.