ClusterSwitchMissing_Alert due SNMPv configure different version on switches

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 5

Visibility:: Public

Votes:: 0

Category:: fabric-interconnect-and-management-switches

Specialty:: hw

Last Updated:

Applies to

ONTAP 9
Cluster network switches
Cluster switch health monitoring (CSHM)

Issue

 Node1::> system health alert show
               Node: Node1
           Alert ID: ClusterSwitchMissing_Alert
           Resource: clsuter-switch
           Severity: Major
    Indication Time: Wed Jul 31 00:09:47 2024
           Suppress: false
        Acknowledge: false
     Probable Cause: Redundant configuration is missing for cluster switches.
    Possible Effect: If the remaining cluster switch fails, you can no longer access the cluster.
Corrective Actions: 1) Ensure that a redundant pair of cluster switches exists in the network.
                     2) Ensure that cluster ports are connected to both switches.
                     3) Enable the Cisco Discovery Protocol (CDP)/Industry Standard Discovery Protocol (ISDP)
                     on switches, if you previously disabled it. CDP/ISDP is enabled by default.
                     Refer to your switch documentation for instructions.
                     4) If ONTAP(R) software cannot automatically discover a switch, use the "system switch ethernet create"
                     command to configure discovery and monitoring of the
                     switch.