Skip to main content
NetApp Knowledge Base

An ifgrp port has transitioned to an inactive state

  1. Last updated
  2. Save as PDF
Views:
432
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

Applies to

  • FAS 2750
  • Cisco Nexus Switch

Issue

  • An ifgrp port transitions to an inactive state causing the interface group to go into a degraded state.
  • EMS.log outputs
[node-01: mgmt_port_link_status_poll:netif.linkDown:debug]: Ethernet e0f: Link down, check cable.
[node-01: mgmt_port_link_status_poll:netif.linkDown:debug]: Ethernet a0a: Link down, check cable.
[node-01: intr:net.ifgrp.lacp.link.inactive:debug]: ifgrp a0a, port e0f has transitioned to an inactive state. The interface group is in a degraded state.
 
[node-01: mgmt_port_link_status_poll: netif.linkDown:debug]: Ethernet a0a-202:Link down, check cable.
[node-01: mgmt_port_link_status_poll: netif.linkDown:debug]: Ethernet a0a-2224:Link down, check cable.
[node-01: mgmt_port_link_status_poll: netif.linkDown:debug]: Ethernet a0a-222:Link down, check cable.
[node-01: mgmt_port_link_status_poll: netif.linkDown:debug]: Ethernet a0a-201:Link down, check cable.
 
[node-01: vifmgr: vifmgr.lifmoved.linkdown:debug]: LIF lif_name (on virtual server xxxxxxxx), IP address xx.xx.xxx.xx, is being moved to node node-01, port a0a-201.
 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.