Skip to main content
NetApp Knowledge Base

Unable to connect remotely to Brocade G630 switch

Last Updated:

Applies to

  • Brocade G630
  • SAN
  • FCP


  • Switch is not available via the management port
  • Switch is in a boot loop and the console output shows panic
pcie@ffe240000: PCICSRBAR @ 0xff000000 paddr_hi 0xbfffffff paddr_lo 0xa0000000 hose_offset 0xb60000000
Freescale FM module, FMD API version 21.1.0
Freescale FM Ports module
m41t11: I2C Real-Time-Clock detected on iic0 addr 0x68
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
Kernel panic - not syncing: No working init found.  
Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.1.35rt41 #1
Call Trace:
[b604fec0] [406fffec] dump_stack+0x84/0xb0 (unreliable)
[b604fed0] [406ff0d4] panic+0xe8/0x228
[b604ff30] [400029cc] kernel_init+0x10c/0x110
[b604ff40] [4000f218] ret_from_kernel_thread+0x5c/0x64

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.