Skip to main content
NetApp Knowledge Base

How to determine the NetApp part number for a power supply (PS / PSU) or fan for Brocade switch

Views:
4,676
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

Applies to

  • SAN
  • MetroCluster switches
  • Brocade switches  G720, G620, G630, 6520, 6510, 6505, 5100, X6-4 and X6-8
  • Brocade Backbone DCX8510

Description

Faulty power supply or fan reported on Brocade 6520, 6510, 6505 or 5100 switch:

Faulty power supply reported by Brocade DCX8510 Backbone

  • Faulty PS reported:

psshow :

Power Supply #1 is OK
Airflow Direction : Port side Exhaust (Reverse)
Power Supply #2 is faulty*
* = No system control access to power supply.

  • Faulty fan reported:

fanshow        :
Fan 1 is Ok, speed is 4071 RPM
Fan 2 is faulty
Fan 3 is Ok, speed is 4119 RPM
Fan 4 is Ok, speed is 18977 RPM
Fan 5 is Unknown

  • Faulty power supply or fan reported on Brocade X6-4 and Brocade X6-8:

psshow        :

Power Supply #1 is OK
V10N18,   DUCXXXXXXHJ      ,23-0000161-01,A0,DELTA,ECXXXXXXX42     ,00,DUXXXX8N
Power Supply #2 is faulty
V10N22,   DUCXXXXXX1H      ,23-0000161-01,A0,DELTA,ECXXXXXXX42     ,00,DUXXXX2N

fanshow        :
Fan 1 is Ok, speed is 4067 RPM
Fan 2 is faulty
Fan 3 is Ok, speed is 4067 RPM

  • Brocade X6-4 Director: Two fan assemblies, non-port side exhaust or intake, for 1+1 redundancy. Each assembly contains 2 fans for a total of 4. The system requires 3 out of 4 functioning fans for operation. One fan assembly can be hot-swapped but must be replaced immediately.
  • Brocade X6-8 Director: Three fan assemblies, non-port side exhaust or intake, for 2+1 redundancy. Each assembly contains 2 fans for a total of 6. The system requires 5 out of 6 functioning fans for operation. One fan assembly can be hot-swapped but must be replaced immediately.
  • Brocade 6505: switch also comes with an option for a single hot-swappable PS unit. Failure of this power supply will bring the switch down and no led light would be seen.
  • Brocade DCX8510 Backbone
    • Faulty power supply

xxxxx20 Power Supply #1 is faulty Brocade DCX8510-8  WWN Serial Num: AFXxxxxL00K     Power Supply #1 is faulty
POWER SUPPLY  Unit: 1
Header Version:         2
Power Consume Factor:   0
Factory Part Num:       23-0000067-02
Factory Serial Num:     AGCxxxxLB8Z

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.