Skip to main content
NetApp Knowledge Base

Brocade switch port down due to incompatible non Brocade SFP

  1. Last updated
  2. Save as PDF
Views:
815
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

Applies to

Brocade Fabric OS (FOS) 9.x

Issue

  • In switchshow, port has state Mod_Inv:
19  19   011300   id    N32     Mod_Inv     FC  "Speed Mismatch / Incompatible SFP"
  • sfpshow lists no information about the SFP:
=============
Port 19:
=============
Port 19 does not use an SFP or is disabled!
  • errdump has message indicating the SFP could be incompatible:
[C4-1001], 25, CHASSIS, ERROR, BrocadeG610, S0,P19(Bp1) user_idx:19 [PID 0x011300] faulted due to invalid SFP, conflicting speed or laser fault. Check if the SFP or port speed is valid for the configuration.
  • When inspecting the SFP in person, it is not Brocade branded

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.