Skip to main content
NetApp Knowledge Base

Brocade X7-8 core blade shows faulty due to bad control processor blade

  1. Last updated
  2. Save as PDF
Views:
60
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

Applies to

Brocade X7-8

Issue

  • Core blade in slot 8 is faulty:
admin> slotshow
Slot Blade Type ID Status
-----------------------------------
1 CP BLADE 220 ENABLED
2 CP BLADE 220 ENABLED
3 SW BLADE 216 ENABLED
4 SW BLADE 216 ENABLED
5 SW BLADE 216 ENABLED
6 SW BLADE 216 ENABLED
7 CORE BLADE 215 ENABLED
8 CORE BLADE 215 FAULTY (142)
9 SW BLADE 216 ENABLED
10 UNKNOWN VACANT
11 UNKNOWN VACANT
12 UNKNOWN VACANT
  • This happened when control processor in slot 1 reset:
[EM-1051], 87845, SLOT 2 | CHASSIS, INFO, fcfb04, Slot 8: Inconsistency detected, FRU reinitialized.
[EM-1033], 87857, SLOT 2 | CHASSIS, ERROR, fcfb04, CP in Slot 1 set to faulty because CP ERROR asserted.
[EM-1047], 87858, SLOT 2 | CHASSIS, INFO, fcfb04, CP in slot 1 not faulty, CP ERROR deasserted.
[EM-1134], 87860, SLOT 2 | FFDC | CHASSIS, ERROR, fcfb04, Slot 8 set to faulty, rc=2008e.
[HAM-1004], 87863, SLOT 1 | CHASSIS, INFO, fcfb04, Processor rebooted - Software Fault:ASSERT
  • slotpoweroff / slotpoweron of faulty core blade was performed without success
  • Reseat of core blade was performed without success
  • Core blade was replaced without success

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.