AutoSupport Message: Inconsistent routing rules detected

Applies to

• NetApp Element software 
• NetApp SolidFire Storage Nodes
• NetApp H-Series Storagte Nodes

Issue

• ASUP: SolidFire Alert from <cluster name> (Network Warning) Inconsistent routing rules detected
• The following message is seen in the Event Logs:

InconsistentRoutingRules
Inconsistent routing rules detected.
Routing rule to nodeID mapping:
{(ip route add xx.xx.xx.xx/26 dev sipi src table sipi, {6}),
 (ip route add xx.xx.xx.xx/28 dev sipi src table sipi, {1,2,3,4,5}),
 (ip route add xx.xx.xx.xx/28 dev mipi src table mipi, {1,2,3,4,5,6}),
 (ip route add default via xx.xx.xx.xx dev sipi src table sipi, {1,2,3,4,5,6}),
 (ip route add default via xx.xx.xx.xx, {1,2,3,4,5,6}),
 (ip route add default via xx.xx.xx.xx dev mipi src table mipi, {1,2,3,4,5,6}),
 (ip rule add from table mipi, {1,2,3,4,5,6}),
 (ip rule add from table sipi, {1,2,3,4,5,6})}

• NetApp SolidFire Active IQ: Inconsistent routing rules detected. Routing rule to nodeID mapping: <routing mismatch information>
• A SolidFire or H-Series storage node was added to the cluster during a cluster upgrade