Skip to main content
NetApp Knowledge Base

Copy back does not occur by VOLUME_HOT_SPARE_IN_USE

Views:
819
Visibility:
Public
Votes:
0
Category:
e-series-santricity-management-software
Specialty:
esg
Last Updated:

Applies to

NetApp SANtricity OS Software 11.70.1

Issue

  • A copy back does not occur after disk replacement, The status of data drive stays at Replaced after disk replacement:

   Drive at Shelf 99, Bay 7
    
      Status:                    Replaced                                         
                   
      Mode:                     Assigned                                         
      Raw capacity:              1,676.716 GB                                     
      Usable capacity:          1,671. 216 GB                                     
      World-wide identifier:    
      Associated volume group:  HDD-RAID5   

  • RECOVERY-GURU-PROCEDURES shows VOLUME_HOT_SPARE_IN_USE.

Failure Entry 1: VOLUME_HOT_SPARE_IN_USE- Recovery Failure Type Code: 21
Storage array: RabbitSAN
Volume group: HDD-RAID5
Status: Optimal
RAID level: 5
Failed drive at:  shelf 99, bay 7
Service action (removal) allowed: No Service action LED on component: No
Replaced by drive at: shelf 99,  bay 8
Volumes: HDD-RAID5

  • The mode of spare disk is Hot spare in-use under STORAGE-ARRAY-PROFILE > Drives:

   Drive at Shelf 99, Bay 8
    
      Status:                    Optimal                                          
                   
      Mode:                     Hot spare in-use                                 
      Raw capacity:              1,676.716 GB                                     
      Usable capacity:          1,671. 216 GB                                     
      World-wide identifier:     
      Associated volume group:  HDD-RAID5  

  • Raid group is still Optimal:

   Name:              HDD- RAID5            
                                           
      Status:         Optimal              
      Capacity:       5, 013.648 GB         
      Current owner:  Controller in bay B  

      Quality of Service (QoS) Attributes

         RAID level:                    5                           
         Drive media type:              Hard Disk Drive             
         Drive interface type:         Serial Attached SCSI (SAS)   
         Shelf loss protection:        No                          
         Secure-Capable:                No                          
         Secure- Enabled                No                          
         Data Assurance (DA) capable:   Yes                         
         DA enabled volume present:    Yes                         

      Total Volumes:           1         
         Thick volumes:       1         
         Repository volumes:  0         
         Free Capacity:        3.648 GB  

      Associated drives - present (in piece order)
      Total drives present:  5

         Shelf  Bay                                                
         99     4        
         99     5                                                  
         99     6            
         99     7                                                  
         99     8 [hot spare drive is sparing for drive at 99, 7]  

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.