What are the Default Management Port IP addresses available on E-Series controllers?

Applies to

All E-Series platforms

Answer

The default management port IP addresses for each controller is shown below:

Default IP addresses for all platforms except EF600 running 11.60 or earlier:

Note: Default IP addresses are in the form 192.168.XXX.10Y, where:
    XXX = 128 is the first port and 129 is the second port on a controller.
    Y      = 1 is for controller A and 2 is for controller B.

Default IP addresses for all platforms running 11.60.2 and later, or EF600 running 11.60 or later:

Note: Default IP addresses are in the form 169.254.XXX.10Y, where:
    XXX = 128 is the first port and 129 is the second port on a controller.
    Y      = 1 is for controller A and 2 is for controller B.

The subnet mask for these are running /16, not /24.

In case of a persistent network configuration issue, please contact NetApp Technical Support and reference this article for further assistance.