Skip to main content
NetApp Knowledge Base

StorageGRID Services don't come up after shutdown

  1. Last updated
  2. Save as PDF
Views:
8
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
sgrid
Last Updated:

Applies to

NetApp StorageGRID

Issue

  • All nodes have been shutdown for maintenance, at  power up, no node is able to start all services
  • StorageGRID UI reports Node not locked with NTP server on all Admin Nodes and Storage Nodes.
  • storagegrid-status output shows Time Synchronization stuck in Starting... state on all nodes. 
  • service ntp status output shows ntp up but not ready. check /var/local/log/servermanager.log
  • servermanager.log output shows ntp not locked
  • Pings are successful to the NTP sources but no information is syncing.
  • NTP time offset and jitter using command ntpq -p shows significant time drift:

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
ntpserver.local  init             1 u   0    0   0      1.045  +2846.3   0.260
ntpserver.local  init             1 u   0    0   0      0.626  +3903.3   0.520
pa_nodename      init            16 u   0    0   0      0.000    0.000   0.000
nodename1        init            16 u   0    0   0      0.000    0.000   0.000
nodename2        init            16 u   0    0   0      0.000    0.000   0.000
nodename3        init            16 u   0    0   0      0.000    0.000   0.000

  • Syncing the NTP clocks using ntpd -q produces no changes to the offset and jitter when running the command.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.