Skip to main content
NetApp Knowledge Base

Single HIC down on newly installed StorageGRID SG1100 appliance

  1. Last updated
  2. Save as PDF
Views:
12
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
esg
Last Updated:

Applies to

  • StorageGRID
  • SG1100

Issue

  • HIC shows down despite replacing hardware on compute controller (cable, SFPs, or NIC)

hic1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 8000 qdisc mq master bond0 state DOWN group default qlen 1000
    link/ether 5c:25:73:3a:98:bc brd ff:ff:ff:ff:ff:ff
    altname nam177sn32
    altname nas34f8np1

  • No hardware issues on the switch side
  • HIC only comes up when FEC is off on the switch side

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.