Skip to main content
NetApp Knowledge Base

NTP alerts for E-series received in StorageGRID GUI

Last Updated:

Applies to

NetApp StorageGRID 11.4 and above


  • StorageGRID reports the following alert for one or more nodes:

Appliance storage controller hardware issue

  • NTP alerts for E-series storage received in StorageGRID:
Either the NTP server's resolved or configured IP address is wrong or the IP address is unavailable via the attached network

The DNS/NTP configuration on this controller is either incorrect or all the NTP servers are unreachable over the network

  • Receiving the Storage Operating System Status (SOSS) alarm reported from multiple Storage Nodes via StorageGRID Interface


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.