Skip to main content
NetApp Knowledge Base

StorageGRID Cassandra Communication Error - AutoSupport Message

Views:
3,428
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
sgrid
Last Updated:

Applies to

NetApp StorageGRID

Event Summary

  • StorageGRID reports CassandraCommunicationError indicating nodes that run the Cassandra service are having trouble communicating with each other.
  • This alert indicates that something is interfering with node-to-node communications. There might be a network issue , the Cassandra service might be down on one or more Storage Nodes or the nodes are overloaded preventing communication

Validate

Confirm the Cassandra services are running:

  1. Login in the Primary Admin node via SSH
  2. Switch to root
  3. Run below two command to verify the status of both services on each storage node:
    1. run-each-node --service ldr --parallel 'service cassandra status'

    Through StorageGRID GUI pre StorageGRID 12: Support > Grid Topology > Storage Node > SSM > Services (verify on a per node basis)

    Resolution

    1. Upgrade, hotfix, decommission, or E-Series storage upgrade in progress. The alert clears when the job finishes:
    2. StorageGRID 12.0.0.5 or earlier, with Cassandra CPU spikes from SSTable growth:
    3. Cassandra is not Running:
    4. Cassandra is Running and the node is overloaded. Often seen with Unable to communicate with node (jmx). Leave the service running and reduce the workload:
    5. nodetool status shows DN, or nodes are online and still cannot reach each other:
    6. Cassandra is Running on every storage node and the alert is still active. Contact NetApp Technical Support.

    Additional Information

    N/A

    NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.