Skip to main content
NetApp Knowledge Base

Boot LUNs could not be accessed by UCS

Views:
531
Visibility:
Public
Votes:
14
Category:
fas-systems
Specialty:
san
Last Updated:

Applies to

  • ONTAP 9.x
  • Cisco UCS
  • FC/FCoE

Issue

Boot LUNs could not be accessed with these access failure errors:

adapter 1/3/1 (fls):5# lunlist 13
vnic : 13 lifid: 3
  - FLOGI State : flogi est (fc_id 0x040020)
  - PLOGI Sessions
     - WWNN 20:02:00:a0:xx:xx:xx:xx WWPN 20:02:00:a0:xx:xx:xx:xx fc_id 0x000000
       - LUN's configured (SCSI Type, Version, Vendor, Serial No.)
           LUN ID : 0x0000000000000000  access failure
       - REPORT LUNs Query Response
     - WWNN 20:01:00:a0:xx:xx:xx:xx WWPN 20:01:00:a0:xx:xx:xx:xx fc_id 0x000000
       - LUN's configured (SCSI Type, Version, Vendor, Serial No.)
           LUN ID : 0x0000000000000000  access failure
       - REPORT LUNs Query Response
  - Nameserver Query Response
     - WWPN : 20:01:00:a0:xx:xx:xx:xx

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.