Applies to ONTAP 9 FabricPool Issue While initializing snapmirror relationship to destination aggregate with Fabricpool and the destination aggregate ran out of space.
This article describes many ways to reclaim space in a full aggregate. If an aggregate runs out of free space, various problems can result that range from loss of data to disabling a volume's guarante...This article describes many ways to reclaim space in a full aggregate. If an aggregate runs out of free space, various problems can result that range from loss of data to disabling a volume's guarantee.
This article describes how to configure/modify Aggregate and Thresholds for Aggregate Nearly Full Threshold and Aggregate Full Threshold values as well as Volume Nearly Full Threshold and Volume Full ...This article describes how to configure/modify Aggregate and Thresholds for Aggregate Nearly Full Threshold and Aggregate Full Threshold values as well as Volume Nearly Full Threshold and Volume Full Threshold values in ONTAP.
Applies to ONTAP 9 Data ONTAP 7-mode Thin provisioned volumes (guarantee = none) Description This article describes how thin provisioned (guarantee=none) volume space is used, and why the command outp...Applies to ONTAP 9 Data ONTAP 7-mode Thin provisioned volumes (guarantee = none) Description This article describes how thin provisioned (guarantee=none) volume space is used, and why the command output of df, df -A and aggr show_space differs. Note: These calculation results can vary due to active I/O transfers.
Applies to Data ONTAP Issue When a Windows client using the CIFS protocol creates a sparse file, the non-meaningful data occupies the free blocks causing the USED space to go up.
Applies to Data ONTAP 8.2.x 7-Mode Issue LUN /vol/<volume_name>/<LUN_name> goes offline because there was no free space on the parent volume Afterwards the LUN disappears, and is no longer visible in ...Applies to Data ONTAP 8.2.x 7-Mode Issue LUN /vol/<volume_name>/<LUN_name> goes offline because there was no free space on the parent volume Afterwards the LUN disappears, and is no longer visible in Data ONTAP
The "hidden" 10% of disk space reserved for WAFL cannot be adjusted, nor can the root user create files in the hidden space. The major advantage is that with one block in every ten always free, the fi...The "hidden" 10% of disk space reserved for WAFL cannot be adjusted, nor can the root user create files in the hidden space. The major advantage is that with one block in every ten always free, the filer is able to locate free space more efficiently, and also have more flexibility in how data is placed to optimize disk writes. Beginning in ONTAP 9.12.1, the WAFL reserve for aggregates greater than 30TB is reduced to 5% for All Flash FAS (AFF) and the FAS500f platforms.
Applies to ONTAP 9.16 Issue Windows host with connected LUN saw the following events regarding the Disk going offline: Example: "disk1 has reached a logical block provisioning permanent resource exhau...Applies to ONTAP 9.16 Issue Windows host with connected LUN saw the following events regarding the Disk going offline: Example: "disk1 has reached a logical block provisioning permanent resource exhaustion condition" and "The volume netapp-Lun1 was not optimized because an error was encountered. The disk was disconnected from the system".
Applies to ONTAP 9 FabricPool Answer A data aggregate containing a root SVM volume with a space guarantee set to "volume" can be added to FabricPool. FabricPool documentation indicates this is not pos...Applies to ONTAP 9 FabricPool Answer A data aggregate containing a root SVM volume with a space guarantee set to "volume" can be added to FabricPool. FabricPool documentation indicates this is not possible Considerations and requirements for using FabricPool A request for change has been submitted to add this caveat
