Applies to NetApp E-Series SANtricity System Manager SANtricity OS 11.30.x or higher Issue E-Series Support Bundle does not save and returns below error in SANtricity System Manager: Unable to write t...Applies to NetApp E-Series SANtricity System Manager SANtricity OS 11.30.x or higher Issue E-Series Support Bundle does not save and returns below error in SANtricity System Manager: Unable to write to the specified file support-data.7z. Please make sure the specified location is accessible, the disk is not full and if the file name entered is valid. (Web Server 422)
If that is your situation you will need to configure the web server to listen on another unused port and then specify that port in the URL. (Officially port 8080 is assigned to http-alt but in reality...If that is your situation you will need to configure the web server to listen on another unused port and then specify that port in the URL. (Officially port 8080 is assigned to http-alt but in reality for local use only it can be anything between 1024-65535. Avoid using ports below 1024 other than port 80 for http or 445 for https.) The listening port is usually specified in the global configuration file for the server or passed as an argument on the commandline when starting the server.
Applies to NetApp E-Series E28xx NetApp E-Series E57xx SANtricity System Manager 11.50.x Issue Unable to log into SAM client on the controller that is affected
Attempting to install ONTAP through option 7 at the boot menu may result in an error similar to the following. The file downloaded is too large. Attempting to install ONTAP via the "system node image ...Attempting to install ONTAP through option 7 at the boot menu may result in an error similar to the following. The file downloaded is too large. Attempting to install ONTAP via the "system node image update" command may result in an error similar to the following. Failed to download package from http://.../97_q_image.tgz. Error: Transferred a partial file : transfer closed with 2427451296 bytes remaining to read http://.../97_q_image.tgz. Error: Transferred a partial file : transfer
"Data could not be loaded from the storage array. One possible cause is the object on which were performing the operation no longer exists. Other possible causes include network issues, inability to c..."Data could not be loaded from the storage array. One possible cause is the object on which were performing the operation no longer exists. Other possible causes include network issues, inability to communicate withe the controller, or loss of power to the storage array. "There was a problem updating the display with the latest information, Possible causes include network issues, inability to communicate withe the controller, or loss of power to the storage array.
Applies to E-Series 28xx E-Series 57xx Issue Event log keeps reporting Controller return status/function call for requested operation every 5-10 minutes, which causes the SANtricity GUI to respond slo...Applies to E-Series 28xx E-Series 57xx Issue Event log keeps reporting Controller return status/function call for requested operation every 5-10 minutes, which causes the SANtricity GUI to respond slowly.
