Skip to main content
NetApp Knowledge Base

"CPLD Flashing Failed" occurs during upgrade due to ipmitool failure

Views:
247
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

Applies to

  • H610S
  • NetApp Element software upgrade from 11.7 or earlier to 11.8 or later

Issue

  • FirmwareAbort occurs during H610S upgrade.

Example:

2020-11-04 02:08:17: Firmware 47%: Flashing firmware
2020-11-04 02:08:17: Warning: This step may take up to 30 minutes to complete. Do not interrupt the upgrade or power cycle the storage node during this step. Doing so may make the storage node unusable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
2020-11-04 04:00:06: FirmwareAbort 47%: [UnhandledError pid=6719 cmd=return ${rc}]

  • The output of the VGA console reports the error like below.

Example:

[2020-11-04T03:55:03Z] Failed cmd=("ipmitool" "bmc" "info") timeout="10s" exit_codes=("124" "124" "124" "124"
...

[2020-11-04T03:57:21Z] CPLD Flashing Failed!

[2020-11-04T03:57:26Z] [UnhandledError pid=6719 cmd=return ${rc}]
 :: sfrtfi_firmware.sh:1843 | firmware_chassis_flash
 :: sfrtfi_firmware.sh:1918 | check_firmware
 :: init:142 | main

  • The node becomes power off.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.