Skip to main content
NetApp Knowledge Base

How to determine the NetApp part number for a power supply (PS / PSU) or fan for Brocade switch

Views:
2,939
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

Applies to

  • SAN
  • MetroCluster
  • Brocade switches  G620, G630, 6520, 6510, 6505, 5100, X6-4 and X6-8
  • Brocade Backbone DCX8510

Description

Faulty power supply or fan reported on Brocade 6520, 6510, 6505 or 5100 switch:

Faulty power supply reported by Brocade DCX8510 Backbone

  • Faulty PS reported:

psshow :

Power Supply #1 is OK
Airflow Direction : Portside Exhaust (Reverse)
Power Supply #2 is faulty*
* = No system control access to power supply.

  • Faulty fan reported:

fanshow        :
Fan 1 is Ok, speed is 4071 RPM
Fan 2 is faulty
Fan 3 is Ok, speed is 4119 RPM
Fan 4 is Ok, speed is 18977 RPM
Fan 5 is Unknown

  • Faulty power supply or fan reported on Brocade X6-4 and Brocade X6-8:

psshow        :

Power Supply #1 is OK
V10N18,   DUCXXXXXXHJ      ,23-0000161-01,A0,DELTA,ECXXXXXXX42     ,00,DUXXXX8N
Power Supply #2 is faulty
V10N22,   DUCXXXXXX1H      ,23-0000161-01,A0,DELTA,ECXXXXXXX42     ,00,DUXXXX2N

fanshow        :
Fan 1 is Ok, speed is 4067 RPM
Fan 2 is faulty
Fan 3 is Ok, speed is 4067 RPM

  • Brocade X6-4 Director: Two fan assemblies, nonport-side exhaust or intake, for 1+1 redundancy. Each assembly contains 2 fans for total of 4. System requires 3 out of 4 functioning fans for operation. One fan assembly can be hot-swapped, but must be replaced immediately.
  • Brocade X6-8 Director: Three fan assemblies, nonport-side exhaust or intake, for 2+1 redundancy. Each assembly contains 2 fans for total of 6. System requires 5 out of 6 functioning fans for operation. One fan assembly can be hot-swapped, but must be replaced immediately.
  • Brocade 6505: switch also comes with an option for single-hotswapable PS unit. Failure of this power supply will bring the switch down and no led light would be seen.
  • Brocade DCX8510 Backbone
    • Faulty power supply

xxxxx20 Power Supply #1 is faulty Brocade DCX8510-8  WWN Serial Num: AFXxxxxL00K     Power Supply #1 is faulty
POWER SUPPLY  Unit: 1
Header Version:         2
Power Consume Factor:   0
Factory Part Num:       23-0000067-02
Factory Serial Num:     AGCxxxxLB8Z

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device