Skip to main content
NetApp Knowledge Base

What is the default and maximum value of bootarg.watch.max_concurrent_posts?

  1. Last updated
  2. Save as PDF
Views:
181
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

ONTAP 9

Answer

From ONTAP 9.2 and later, the values are changed.
  • The default number of watch post slots increases from 8 to 163.
  • The maximum value of the bootarg.watch.max_concurrent_posts bootarg increases from 96 to 2048.

Additional Information

Some applications might fail if the value of bootarg.watch.max_concurrent_posts sets too low.

Run the following command to change the value to match application's requirement:

node run -node * bootargs set bootarg.watch.max_concurrent_posts < new value >

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.