Skip to main content
NetApp Knowledge Base

LUN shown with a different signature on a RedHat Host

  1. Last updated
  2. Save as PDF
Views:
203
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
san
Last Updated:

Applies to

ONTAP 9

RHEL 7

Issue

LUN Serial Number (Hex): discrepancy between the storage and hosts:

Host:

[root@rhel ~]# multipath -ll
MY_LUN (3600a09803830xxxxxxxf4c4c486e6367) dm-118 NETAPP  ,LUN C-Mode
size=1.0T features='4 queue_if_no_path pg_init_retries 50 retain_attached_hw_handle' hwhandler='1 alua' wp=rw
|-+- policy='service-time 0' prio=50 status=active
| |- 11:0:0:30 sdpb               130:272    active ready running
| `- 7:0:0:30  sdov               129:432    active ready running
`-+- policy='service-time 0' prio=10 status=enabled
  |- 12:0:0:30 sdpe               130:320    active ready running
  `- 13:0:0:30 sdph               130:368    active ready running

Storage:


cluster1::> lun show MY_LUN -fields serial-hex
vserver   path                serial-hex
--------- ------------------- ------------------------
vserver /vol/my_vol/MY_LUN 3830xxxxxxxf4c4c486e6369

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.