Skip to main content
NetApp Knowledge Base

Event log shows "Controller failover of node_name is not possible: unsynchronized log"

Views:
59
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

FAS8080

Issue

The following error message occurs.
 
Thu Feb 18 02:15:06 JST [node2: monitor: monitor.globalStatus.critical:EMERGENCY]: Controller failover of node1 is not possible: unsynchronized log.
 
The interconnect port is at suboptimal speed.
 
Interconnect Port 1:
Port Name: ib0a
Default GID: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
Base LID: 0xed4
Active MTU: 4096
Data Rate: 10 Gb/s (4X) SDR
Link State: ACTIVE
QSFP Vendor: Molex Inc.
QSFP Part Number: 112-00374+A0
QSFP Type: Active Optical 5m ID:00
QSFP Serial Number: xxxxxxxxxxxxxx
 
Interconnect Port 2:
Port Name: ib0b
Default GID: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
Base LID: 0xed5
Active MTU: 4096
Data Rate: 40 Gb/s (4X) QDR
Link State: ACTIVE
QSFP Vendor: Molex Inc.
QSFP Part Number: 112-00374+A0
QSFP Type: Active Optical 5m ID:00
QSFP Serial Number: xxxxxxxxxxxxxx

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support