Skip to main content
NetApp Knowledge Base

Drives for newly added shelves are shown with different stack numbering

  1. Last updated
  2. Save as PDF
Views:
181
Visibility:
Public
Votes:
0
Category:
disk-shelves
Specialty:
hw
Last Updated:

Applies to

  • FAS8700
  • 9.7P10
  • DS224C disk shelves

Issue

  • After adding DS224C disk shelves to a new stack, the installed drives are shown with different stack numbering when being assigned to a controller

Cluster::> storage disk assign -owner <node name> -disk <disk name>

  • Before assigning the drives:
    Cluster::> disk show
    2.11.0 - 11 0 SSD unassigned
    2.11.1 - 11 1 SSD unassigned
  • After assigning the drives:
    Cluster::> disk show -node <node name>
    3.11.0 3.49TB 11 0 SSD spare Pool0 Node-02
    3.11.1 3.49TB 11 1 SSD spare Pool0 Node-02
     

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.