Skip to main content
NetApp Knowledgebase

Cluster switch not reachable via SNMP, CSHM (cluster switch health monitor) alert

Views:
426
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

All Ontap

Issue

  • Below health alert is triggered, after node reboot.
  • SNMP configuration is checked to be correct and has not been changed prior to this alert.

cluster_name::*> system health alert show
Node: node_name
Resource: switch_name
Severity: Major
Indication Time: Sat Jul 13 09:40:57 2019
Suppress: false
Acknowledge: true
Probable Cause: Cluster switch "switch_name" with IP address
"xx.xx.xx.xx" is not reachable via SNMP. Incorrect
SNMP community string might be configured on the
cluster switch.
Possible Effect: Cluster switch communication problems and
accessibility issues.
Corrective Actions: Check the SNMP community string on the cluster switch
to verify the expected community string is configured.
Use the "system cluster-switch show -snmp-config"
command to view the expected community string.

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support